ESU 50200 : Ecos Centrale Digitale

Centrale Digitale Ecos




1 article(s)

ESU 50210 : Centrale Digitale Ecos 2.1

Centrale multi-protocoles : DCC-NMRA, MOTOROLA, Selectrix.
- Ecran TFT 7 pouces avec dalle tactile.

- 2 postes de commande
- Sortie max 7A

- Bus extension ECoSlink
- Bus retrosignalisation S88
- Interface Ethernet RJ45.
- Alimentation en tension réglable.

Contenu :
- Centrale ESU ECoS
- Connecteurs
- Bloc secteur 90VA avec tension réglable
- Stylet
- Manuel d'utilisation (en allemand)

 Téléchargez le manuel d'utilisation en français dans l'onglet "Fichiers joints"

Données techniques complètes :

Hardware H4 booster with 6.0 A continuous-load output
  RailCom® bidirectional feedback detector with integrated cutout device ("global detector")
  H4 programming track connection, 0.6 A rated
  7 inch TFT colour display with touchscreen, 800x480 (pixels) display resolution
  32-Bit ARM 720T controller, 64 MByte flash ROM, 32 MByte RAM, Linux® operation system
  16 Bit real-time co-processor
  2 motor-driven potentiometer throttles with end stop
  two 2-way analog joysticks; two 9-function keys plus stop- and go-key
  3 input sockets for ECoSlink systems
  Connection for ECoSlink bus expansion
  Galvanically isolated booster input for external DCC or Märklin® 6017 boosters
  Galvanically isolated ECoSniffer input for connection of old units
  Galvanically isolated s88-bus input for feedback devices; 10/100 Mbit ethernet connection (RJ45)
  1 ECoSlot module for radio-receiver input
Software DCC with 14, 28, 128 speed steps, LGB® compatible function key handling
  Märklin® Motorola® old, new, with 14 or 27 speed steps (2 modes, depends on availability of decoder)
  Selectrix® track format
  M4 data protocol with automatic recognition
  Up to 9999 addresses for DCC protocol. Up to 20 function keys per loco
  Up to 255 addresses for Motorola® protocol (depends on availability of decoder)
  Märklin® Motorola® and DCC track protocol for control of electromagnetic accessories
  Up to16384 locos, 2048 turnouts and 1024 route objectives; 32 MU´s (multiple consists) with up tp 16 locos each
  Up tp 16 shuttle trains (back´n forth) at the same time
  All DCC service modes programming on programming track, POM (programming on the main)
  Programming of Motorola® and Selectrix® on programming track.
Included in delivery  ECoS central unit
  Stylus for touch screen
  Power supply output voltage adjustable from 15V to 21V / 7A (150VA)
  Terminals for mail track and programming track connection, ECoSniffer
  Extensive instruction manual (german)
Dimensions 37.0 cm x 16.0 cm x max. 9.0 cm

Manuel ECoS (ESU_EcoS_FR.pdf, 3,221 Kb) [Télécharger]

Aucun post trouvé

Nos client ont aussi acheté